 |
|
|
Images courtesy of Artetch Circuits
Ltd, National Motor Museum Beaulieu, John Wiley & Sons
Publishing and Aker Solutions Ltd
|
Roller Banner Stands
Banner stands are probably the most widely used form of display
stand, for very good reasons. The convenience of transport is unsurpassable,
virtually all banner stands are supplied in carry cases with shoulder
straps and handles. They can be carried on busses, trains even aeroplanes!
Getting your display to the venue could not be easier.
Once there erecting the banner stand is simplicity itself, no tools
or skills are required. Even someone who has never seen a banner
stand will have an outstanding graphic display erected in a matter
of minutes!
The variety of banner stands on offer is outstanding from simple
budget roller banners to linkable tension stands and outdoor stands
the range of formats and sizing on offer makes banner stands the
most versatile and cost effective display solution. Sizes range
from 400mm wide to potentially unlimited width with linkable units,
heights range from 1 meter to 5 meters (available on some outdoor
models) The only limit is your imagination!
Used in a wide range of locations for an equally wide range of purposes,
banner stands are ideal for exhibitions, conferences, seminars,
in-store displays, networking events, shopping centre promotions
in fact any situation where a portable, fast assembly display is
required.
Many accessories are available to enhance these displays including
lighting, literature display, shelves and AV options.
Our staff will be more than happy to offer advice or to assist with
your choice of stand. - See more information at ‘Banner
Stand Choices’
All our banner stands are supplied complete with full colour graphic.
- See more information at ‘Banner
Stand Graphics’
Banner stands are sometimes referred to as ‘pop-up’
or ‘pull-up’ stands or ‘roller blinds’,
‘graphic cassettes’, ‘roller banners’ etc.
They are all essentially the same product, which is a retractable
or roll-able graphic in a lightweight portable base with a telescopic
or folding pole.
A3M Designs offer a wide
range of banner stands from a selection of manufacturers including:-
Ultima Displays, Plex, Nimlock, Nomadic, Clip, Framework Displays,
Premier, Larsen, Marc Bric and many more.
Models in our range include:- Advance, Barracuda, Imagine, Discovery,
Excalibur, Orient, Stretch, Eco, UB190, Mosquito, Rollow, Blade,
Lightning, Uno, Pegasus, Boomerang, Vortex, Dash Mega, Blizzard,
Hurricane, Storm, Wind Dancer, Maverick, Genie, Pod, Sidewinder,
Omega, Snappy, Anaconda, Salamander, Opto, Twist, Travel twist,
Retail Twist, Quickroll and Larsen RB850 to name just a small selection.
Banner Stand Graphics
The print on a 185gsm full stoplight polypropylene media, guaranteed
to allow no light showthrough, is also tear resistant and protected
by 150micron flat matt laminate.
Textured laminate is available as an option if requested.
The inks used are pigmented inks, which are UV stable and of consistent
quality.
High resolution print using Epson printers.
We do not supply laminated paper or PVC graphics on our indoor banner
stands.
(Some outdoor banner stands have graphics printed on a heavyweight
440gsm PVC, this is a total blockout material, completely impervious
to light.) – see more information ‘Outdoor
Stands’
‘Easy-change’ Cassette Graphics
The ‘Easy-change’ cassette system allows the graphic
to be changed in seconds, with no tools or skills required. With
the graphic retracted simply open the housing flap in the base unit,
lift out the cassette, pop in the new cassette, close the flap and
your stand is once again ready for use!
This cassette system on banner stands can maximise the use of hardware,
or allow you to change your stand image quickly and easily at an
event to create maximum visual impact.
Outdoor Stands
A3M Designs offer a range of stylish and portable outdoor stands.
Banner or flag style displays, many with the option of graphics
on both sides for 360 degree impact. To promote your product or
service in any outdoor situation we have the outdoor stand to suit
your requirement. See ‘Outdoor
Stands’
Outdoor Stand Graphics
Heavyweight 440gsm PVC, printed with solvent inks, is used to create
the graphics for our range of outdoor stands. Outdoor stands with
these tough long lasting graphics are a long term display solution
for the outdoor environment.
From simple logo’s and text to eye-catching photo quality
artwork, the images on our outdoor stands can work to sell your
product. See ‘Outdoor Stands’
Banner Stand Choices
Roller Banner Stands
Roller Banner Stands have a graphic attached to a spring loaded
roller in the base. The graphic can be retracted into the base by
simply unhooking from the top of the pole and allowing to gently
roll up in the base using the spring tension. The poles are either
a 3 part ‘bungee’ style pole or the more modern telescopic
variety, both collapse to approximately the same length as the stand
base, making transport and storage easy, all these stands are supplied
in a carry case for convenience. The graphic on most these banner
stands can be changed or replaced by us at a future date. See ‘Roller
Banner Stands’
Cassette Stands
Essentially a Roller Banner Stand but with the graphic contained
within a removable cassette. This allows for quick change of image
or the ability to have several pre-loaded cassettes utilising one
base unit. No tools or skills required. See ‘Cassette
Stands’
Tension Stands
Simple frames to which the graphics hook on, the frames are normally
made from tensioned rods which keep the graphic tightly in place.
There are many varieties of tension stands available, some very
large and others linkable to form large displays. Tension stands
are very light, easy to erect and transport and offer a clean stylishly
simple, yet effective, solution to graphic displays. See ‘Tension
Stands’
Outdoor Stands
To cope with the elements outdoor stands have graphics produced
onto weatherproof PVC, most outdoor stands have weighted bases to
resist the effects of wind. See ‘Outdoor
Stands’
Large Display Stands
A3M Designs is proud to offer a range of different display solutions
as alternatives to banner or pop-up stands. The selection includes
wide and tall stands, linkable stands and some unique flexible solutions.
See ‘Large Display Stands’
Roller
Banner Stands
Roller Banner stands are a most exciting medium
of presentation, giving instant impact, ideal for conferences, retail
displays and additional emphasis on an exhibition stand. Our Roller
banner stands are printed using high quality digital inkjet technology
for stunning images on polyester stoplight media, with a 150 micron
matt laminate seal for hard wearing graphics that really stand up
to the rigors of exhibition life.
We supply roller banner stands all across the UK and great prices.
From Hampshire, Surrey, West Sussex, Sussex, Surrey, London and
all over the UK.
|
